回顶部
Pin of m8 automation equipment connector characteristics:
Welding needle Pin:
1. Do not need specific tools, just need electric soldering iron
2. Especially suitable for very small and brittle core of cable
3. The opening of the needle core has a welding cup, which can make the solder flow fully
Crimping pin :
1. Practical and fast fixing pin core, and operating outside the insulator
2. It can be used at relatively high temperature
3. Need to buy special tools
4. The insulator will not be heated in the process of crimping the pin core like welding
5. High tensile strength
6. Complete and thorough lead-free solution
Board pin :
1. Make PCB more solid and reliable
2. Reduce damage to PCB caused by equipment vibration
3. Realize signal transmission in dense space equipment
Material and specifications of m8 automation equipment connector :
Coupling Threaded coupling
Shell material Brass nickle plated
Insert material PA66+30%GF
Contact material copper(silver /gold plated)
Termination Soldering
Mating cycle 500
Temperature Range -25℃ ～+85℃
Cable diameter ≤ φ3.3-5.0mm
Specification of M8 automation equipment connector
Number of Contacts 3, 4, 5, 6, 8
Rated Voltage 60V 30V
Rated Current 4A 1.5A
Contact Resistance <5mΩ
Insulation Resistance >100MΩ
Pollution Degree 3
Temperature Range -20℃ to +85℃
Degree of Protection IP67 when mated
Mating Times 100 cycles
Nom Pin φ 1.0±0.03 0.8±0.03
Wire Gauge 24AWG 26AWG
Cable Jacket PVC or PUR
Material of Housing Brass Nickel Plated
Material of lnsertion PA66+GF UL94V-0
Material of Contact Male Brass/Female Phosphor Bronze ,Gold Plated
The last product:M8 cable connector
The next product:M8 automation field-bus connector
