您的浏览器版本太低

Choice of connection system on camera
Why the LEMO connector produced by Changrong Xu was selected for the camera?
When selecting wires and connectors, the engineering designers should choose according to the usage of customers:
1. The client needs to move the camera frequently when shooting.This inevitably pulls or tugs the wire.But the domestic general connector are no buckle, so a little extra force, the connector will tear off.
2. Customers often need to shoot in rainy or humid conditions, which requires the connector to be waterproof and corrosion-resistant.
3. We need to shoot in different environments, such as the north in winter and the outdoors in the hot summer this year.This requires the connector to withstand high and low temperatures.
The plug-and-unplug self-locking connector produced by Shenzhen Xusheng Evergreen can perfectly solve these problems:
1. Resistant to high and low temperature from -45℃ to +125℃. At the same time, the specially designed needle core produced by Changrong Xu will not cause the signal transmission disconnect due to contraction when the temperature is below zero.
2. Salt spray corrosion test: > 48h.After indoor testing and open sea exit testing.
3. Waterproof rating: IP66-IP68.
4. Plugging times: > 5000 times.General domestic needle core is copper - plated aluminum, signal transmission loss is relatively large, and plug wear is faster.Xu Sheng Evergreen needle core is copper - plated, small signal transmission loss.
5. Special self-locking design. When the connector is self-locking, the cable will generally not cause the connector to fall off.Either horizontally or from other angles.