回顶部
The features of m5 female 90° angled DIP connectors :
1.m5 female rear panel-mount,front panel lock nut fastened.
2.90° angled DIP PCB type.
3.Recommended installation sequence: Install the connector before welding the PCB board
4.The thickness of the panel cannot exceed 3mm
5.Number of contacts: 2pins (only for power connectors), 3 pins, 4 pins
6.O ring (waterproof washer) material and color are optional
7.With shielded and grounded
The core parameters of m5 female 90° angled DIP connectors
Standard: IEC 61076-2-105
Interface standard m5*0.5mm interface
Coding No
Ambient temperature: -25℃ ~ +85℃
Connector insert: TPU or PA66+GF
Connector contacts: Brass with gold plated
Coupling nut/screw: Brass with nickel plated
Seal/O-ring: Epoxy resin
Insulation resistance: ≥100MΩ
Contact resistance: ≤5mΩ
Shielding： choosable
IP rating: IP67 or IP68 in locked condition
Coupling : Threaded coupling
Termination: Solder
Mechanical operation: > 500 mating cycles
Cable diameter: ≤ φ3.3mm
Number of Contacts: 3pin,4pin
Rated Voltage: 60V
Rated Current: 1A
Contact Resistance: <5mΩ
Insulation Resistance: >100MΩ
Pollution Degree: 3
Nom Pin φ 0.48±0.03
Wire Gauge max 0.14mm2/max 26AWG
Cable Jacket PVC or PUR
pin contact CuZn
Socket contact CuZn
Contact plating Au
the last product:m5 female 180° DIP 3P 4P PCB connectors
the next product:m5 connectors cables
