您的浏览器版本太低

m8 front panel mounted  rear panel fastened solder connectors features:
1.coding type:A code,B code,D code,P code
2.connector type:panel-mount male,panel-mount female
3.termination:solder
4.Installation Method:rear panel-mount,front panel fastened
5.wire guage:26/24/22 AWG HOOK-UP wire
6.panel hole size:m8*0.5mm,0.8*1.0mm,m11*1.0mm
7.Note:If the connector is welded to the hook-up wire, install the connector first,and then weld the terminal or PCB on the other end of the hook-up wire.If the connector has soldered thehook-up wire and the hook-up wire soldered with hosing or , check whether the hosing or PCB can pass through the opening size of the M8 panel.

m8  front panel mounted  rear panel fastened solder connectors material and specifications:
standard: IEC 61076-2-104
Connection Type:m8 screw clamp,m11 screw clamp
product type:m8 circular waterproof connectors and waterproof cables
Coding:A-coded(3,4,5,6,8pins),B-coded(only 5pins),D-coded(only 4pins),P-coded(only 4pins)
Shell material:Brass with nickle plated
Insulator material:PA66+30%GF
Contact material:Brass with (silver /gold) plated
Termination : Soldering,crimping
Mating cycle:500cycles
Cable diameter:≤ φ3.3-5.0mm                                               
Contact Resistance:<5mΩ
Insulation Resistance:>100MΩ
Pollution Degree:3
Temperature Range:-20℃ to +85℃
Nom Pin φ:female 1.0±0.03,male 0.8±0.03                                     
Cable Jacket:PVC,PUR ,TPE,TPU
Shielding or not: Optional
Protection Level: IP67/IP68/IP69K (in locked condition)
product category:Shielded or unshielded male and female soldering molding type, Shielded or unshielded male and female  soldering molding type straight or right angle waterproof cables,  Male or female  panel-mount soldering type,male or female panel-mount straight pin DIP type,male or female panel mounting right angle pin PCB type,Plastic shell assembly solder type,Plastic shell crimping assembly type,metal shell solder assembly type,metal shell crimping assembly type,Y type one conector or cable to two connectors or cables,T type one connectors to multipath connectors or cables.

M8 industrial automation connector electric parameters:        
  pin    Rated Current      Rated Voltage   Wire gaue  Wire OD   Wire aterials   Core wire
              A/C  D/C     AWG    mm2   
03 pins  3A      60V  60V  24   0.25      PUR/PVC        PVC
04 pins  3A      30V  30V  24   0.25      PUR/PVC        PVC
05 pins  3A      30V  30V  24   0.25      PUR/PVC        PVC
06 pins  1A      30V  30V  26   0.14      PUR/PVC        PVC
08 pins  1A      30V  30V  26   0.14      PUR/PVC        PVC

the last  product:m8 P-coded male 4pin shield molding connector

the next product:m8 rear panel mounted front panel fastened soldering connectors