回顶部
Wire-to-wire connector needle core features:
The safe and reliable electromechanical continuity of Remo's cylindrical pin core is achieved through the following two important design features:
1. The precise positioning structure of the insertion end (female pin) ensures perfect concentric connection even if the connector is inserted inadvertently.
2. The pressure spring has a good elasticity to ensure that the force acting on the male needle core can be maintained uniform and constant when inserting.The pressure spring front design protects the gold-plated surface of the male needle core to prevent premature wear.
Wire-to-wire connectors are known for their special self-locking function:
1. Special positioning key positioning, to prevent blind insertion.At the same time, the same model can be equipped with single positioning key, double positioning key, three positioning key, so as to prevent accidental insertion.
2. Special self-locking function, built-in locking sleeve, with good elasticity of beryllium bronze.Once the plug is plugged into the socket, it will self-lock and can withstand a maximum tension of 800N.
3. Special needle-core structure, the plug is inserted into the socket, even if the connector is inserted inadvertently, it can ensure the perfect concentric connection.At the same time, the pressure spring at the end of the socket mother needle has good elasticity, which can ensure that the wear of the male needle core can be reduced when inserting.
Wire-to-wire connectors:
Fast Plug and Unplug Self-locking systems are known for their simple and quick plugging and unplugging.It can effectively resist vibration and impact, and can prevent the disconnection caused by pulling the cable. It is absolutely safe and reliable to use, and convenient to plug and unplug in a very limited space.
1. Simple operation of the self-locking system, just need to simply push the plug along the axis to the socket can be locked.
2. Once locked, pull the cable or any other part of the connection without pulling the unlocking device.
3. When necessary, just pull the unlocking device along the axial direction, and the locking bolt will be lifted first, and then the plug will be withdrawn from the socket.
The last product:Custom circular PCB soldering block connector
The next product:High-voltage connector
