回顶部
Quick push-pull plug self-locking connector types:Aviation plug GB series, GX special series, XS thread special series, waterproof USB series, waterproof RJ45/RJ11 series, waterproof coaxial BNC/TNC series, BINDER/Amfino/Phoenix/waterproof sensor connector M5/M8/M9/M12/M16/M19/M23 series,LEMO push-pull self-locking T/K/ deep sea series, ODU ODU plastic medical connector push-pull self-locking P series, LED plastic M16 connector series, optical fiber waterproof series, etc., there are many kinds.
Quick push-pull plug self-locking connector has the following characteristics:
Plug: housing (copper plated nickel-chrome) - locking sleeve (beryllium bronze) - tail cap (copper plated nickel-chrome) - insulator holder (stainless steel) - insulator (PPS) - male pin core (copper plated) - wire clip (copper plated).
Receptacle -- enclosure (nickel-chrome copper) -- grounding ring (aluminum alloy) -- fixing ring (aluminum alloy) -- hexagon nut (aluminum alloy) -- locking sleeve (copper chrome copper) -- locking washer (copper plated alloy) -- insulator (PPS/PEEK)
Features of quick push-pull plug self-locking connector:
The material selection of the insulator for the fast push-pull plug and pull self-locking connector is based on the different requirements of different types of connectors on the electrical performance and thermal performance. The following are the electrical performance indicators to be considered in the selection of materials:
1. Insulation strength
2. Relative Trace Index (CTI)
3. Surface and volume resistivity
4. Continuous working temperature
5. Water imbibition
6. Radiation protection level
7. Fire rating
8. Hydrocarbon resistance
Selection of insulation materials for quick push-pull plug and pull self-locking connectors:
Thermoplastic materials have common characteristics, some of which are the same as other insulating materials.Therefore, the selection of insulating materials is based on the different properties of thermoplastic materials in specific indicators, in order to meet the requirements of different types of connector indicators.
Technical characteristics of fast push-pull plug self-locking connector:
Insulation strength: PEEK (19-25kV /mm).
Volume resistivity (23℃, relative humidity 50%) : Pa.6 (5.8*10 cm).
Thermal conductivity: PTFE (0.23W/K.M).
Relative electric trace index (CTI) : PEEK (CTI 150V).
Maximum continuous working temperature: PA6.6-120℃, PEEK-250℃, PTFE-260℃, FEP-200℃, PI-350℃.
Maximum short-time working temperature: PA6.6-150℃, PEEK-300℃, PTFE-300℃, FEP-260℃, PI-480℃.
Hydroscopicity (24 h, 23℃) : PA6.6 < 0.7%, PEEK < 0.3%, PTFE < 0.01%.
Quick push-pull plug self-locking connector:
Rapid push-pull plug-pull self-locking systems are known for simple and quick plug-pull.It can effectively resist vibration and impact, and can prevent the disconnection caused by pulling the cable. It is absolutely safe and reliable to use, and convenient to plug and unplug in a very limited space.
1. Simple operation of the self-locking system, just need to simply push the plug along the axis to the socket can be locked.
2. Once locked, pull the cable or any other part of the connection without pulling the unlocking device.
3. When necessary, just pull the unlocking device along the axial direction, and the locking bolt will be lifted first, and then the plug will be withdrawn from the socket.
Electrical parameters of quick push-pull plug self-locking connector:
1. Core number: 1-32 cores.
2. Rated current: 1A-30A
3. Rated voltage: 110V-1500V
4. Shell material: brass nickel plating, brass pearl chromium plating, aluminum, stainless steel, engineering plastic materials.
5. Needle core surface treatment: bleached gold, gold-plated 2U ", 3U ", 0.75U, 1U, nickel plating, silver plating, etc
6. Wiring mode: welding, pressing, welding plate
The last product:new energy power storage and charging connector
The next product:Coaxial triaxial connector
